Commercial Air Filters
Kitchen Grease Aluminum Mesh
Filter offers the Smith Aluminum Mesh filters which are uniquely designed
to remove dust, dirt and other foreign objects from the air. The patented
design causes the air to constantly change directions while passing through
the filter. Smith Aluminum mesh filters will hold up to numerous cleanings
as long as strong alkali solutions aren't used. When using Smith Mesh
Filters in an air application, Smith Filter Spray is recommended to achieve
maximum dirt retention.
THRIFT-AIRE filter is a
six layer filtering element, processed from sheet Aluminum commercially
known as 3000-h14 .025 thickness, expanded to .20 strand at specific feeds
to assure maximum filtering and internal loading capabilities. The frame
is made from sheet aluminum, roll formed to the exact specifications needed
to create a solid filter. Corners are mitered and secured in one of those
corners by rivets. Filter units will retain 290 grams of dust per 2.25
sq. ft. (20x20 filter). Resistance, when clean, is 0.05w.g. at 350 FPM
air velocity. Maximum resistance at capacity is 0.335 w.g. The THRIFT-AIRE
will withstand temperatures up to 240 degrees F. This light weight Aluminum
filter was designed to be used in air handling units, roof top units,
light industrial and home applications
Here For More Info On Thrift-Aire
Smith LIFETIME filter is
made from seven layers of expanded sheet Aluminum known as 3003-h14, expanded
to .031 strand. Frames are made from sheet aluminum .040 thickness and
roll formed to allow for precise dimensions, then joined together by aluminum
rivets at one corner. These sturdy Aluminum filters are precision made
and thoroughly tested, exceeding the test requirements for Fed. Spec.
ASTMF872. The Lifetime filtering element will retain 571 grams of dust
per 2.25 sq. ft. (20x20 filter) of filter area. Resistance when clean
is .077 w.g. at 350 FPM air velocity. The maximum temperature range of
the LIFETIME filter is 250 degrees F. The Smith LIFETIME filter is designed
to be used in automatic heating, ventilation or air conditioning units
plus other applications where a sturdy permanent filter is required.
Here For More Info On Lifetime
HEAVY DUTY filter element
consists of 8 layers of aluminum commercially known as 3003-H14, .025
thickness expanded to .050 strand. The front layer of expanded is extra
rigid to give additional strength to the filter. The frame is made from
sheet aluminum, .040 thickness joined by heavy rivets at one corner. This
heavy Aluminum filter will retain 585 grams of dust per 2.25 sq. ft. (20x20
filter) of filter area. Resistance when clean is .077 w.g. at 350 FPM
air velocity. Maximum temperature range of the Smith HEAVY DUTY is 275
degrees F. The HEAVY DUTY Aluminum filter is designed for extra rugged
use in high capacity heating and air conditioning units, plus other applications
where a rugged aluminum filter is required.
Here For More Info On Heavy Duty
BONDED "A" filter
is processed from Bonded Aluminum material that consists of many layers
of tiny baffles, bonded together to make up a solid pad. Frames are made
from sheet Aluminum, 3003-H16, .025 thickness. This filter element will
retain 204 grams of dust per 2.25 sq. ft. (20x20 filter) of filter media
with an average arrestance of 71.5%. Resistance when clean is 0.4 w.g.
at 350 FPM. There are many uses for the BONDED ?A? filter. A few of these
are ceiling vent fans, auto air conditioners, central air conditioners,
computer environment systems, electronic air cleaners, range hood fans,
room air conditioners, and wall heaters.
Here For More Info On Bonded "A"
FILTERS AND MERV RATINGS MERV RATINGS
Efficiency Reporting Value) are used by the HVAC (Heating, Ventilating
and Air Conditioning) industry to describe a filter's ability to remove
particulates from the air. A higher MERV rating means better filtration
and greater performance. Holt Filter's Inc. now provides both MERV 7 and
MERV 11 HVAC air filters.
Grease Aluminum Mesh