Commercial Air Filters
|
Phoenix
Poly-Ring, Sleeves & Links
|
FEATURES
The
Phoenix Series Poly-Rings, Sleeves and Links offer a variety of styles,
multiple filtration media layers and performance levels for most applications.
From
an air entering filter for paint booths to upgrading a lower efficient
filter installation, the Poly-Ring Panel Filter is perfect for many filtration
applications. The Glasfloss Phoenix Series Poly-Rings are offered in 1/2":
PR-5; 1": PR-10 and 2": PR-20 nominal thickness for a broad
range of dust loading applications.
- Available
in Rings, Sleeves and Links
-
100% Non-woven Polyester Media
-
Multiple Layers of Progressively Dense Media Fibers
-
Internal Wire Frame Structure
-
Self-sealing Media Gasket
CONSTRUCTION
The
Glasfloss Phoenix Series PR-5, PR-10 and PR-20 filters are constructed
with multiple layers of progressively dense, 100% non-woven polyester
media. The media layers are thermally sealed around an internal, wire
frame. A center wire support strut prevents the filter media from ballooning
during operation. The progressively dense orientation of each media layer
enables the small micron size particles to depth load within the filter.
The last layer of media incorporates a non-migratory, in-line tackifier
that is bonded to the media fibers allowing maximum use of the filter's
upstream layers. The in-line tackifier will not shed and contaminate equipment
downstream of the filter. The Glasfloss Phoenix Series shall incorporate
sufficient media overlap around the filter's perimeter to prevent
contaminants from bypassing around the holding frame.
APPLICATIONS
The
Glasfloss Phoenix Series Poly-Rings, Sleeves and Links can be used in
a variety of HVAC applications and are commonly used as the air intake
filter for spray paint booths. The Phoenix Series filters are manufactured
with components impervious to moisture, which makes them excellent for
rooftop units and HVAC applications plagued with high humidity. The Phoenix
Series
filters are durable; incorporating a heavy-duty internal framework, they
are less likely to suffer damage during transit. Whether used as the primary
or the pre-filter to extend the life of more expensive final filters,
the Phoenix Series offers value and performance not found in other filters.
ABOUT
FILTERS AND MERV RATINGS
MERV RATINGS
(Minimum
Efficiency Reporting Value) are used by the HVAC (Heating, Ventilating
and Air Conditioning) industry to describe a filter's ability to remove
particulates from the air. A higher MERV rating means better filtration
and greater performance.
SPECIFICATIONS
Glasfloss Phoenix Series Poly-Rings,
Sleeves and Links shall be constructed utilizing layers of 100% non-woven
polyester media. For optimum performance, the air leaving side of the
Phoenix Series products shall be treated with a non-toxic, non-migratory
adhesive. An internal wire frame
shall be thermally sealed within the filter to maintain integrity. A thermal
seal shall extend around the perimeter edge of the internal wire frame
and on both sides of the center wire support strut, ensuring the permanent
bond of all media plies. There shall be sufficient media overlap to ensure
a positive seal between the filter and the holding frame, eliminating
the possibility of air bypass and the need for supplemental gasketing.
Click
Here for more info
Phoenix
Poly-Ring, Sleeves & Links
|